No sign-up needed

Free CSCP practice test

20 questions, each with a clear explanation.

Quick PracticeQuestion 1 of 20
Your progress through this set
Forecast and Manage DemandStep 1 · Choose one answer

A planner reviews the last 12 monthly forecasts for a product. Each miss is small, but actual demand came in below the forecast in 11 of the 12 months. What does this pattern show?

Question review

All 20 CSCP questions with explanations

Try the set above first, then use this list to review. Each answer and explanation stays closed until you open it.

  1. Question 1 · Forecast and Manage Demand

    A planner reviews the last 12 monthly forecasts for a product. Each miss is small, but actual demand came in below the forecast in 11 of the 12 months. What does this pattern show?

    1. The forecast is accurate, because each monthly error is small
    2. The forecast is biased and keeps running above actual demand
    3. Demand has turned random, so no method can forecast it
    4. The forecast should switch to a qualitative method now
    Show answer and explanation for question 1

    Correct answer: B · The forecast is biased and keeps running above actual demand

    ASCM's CSCP outline lists forecast error and forecast bias as two separate parts of measuring forecast accuracy. Errors that land on the same side month after month point to bias, and forecasting texts such as Hyndman and Athanasopoulos's Forecasting: Principles and Practice call forecasts biased when their errors don't average out to zero. This forecast keeps overstating demand, which builds excess inventory even though each miss looks minor. Calling it accurate because each error is small ignores the direction of the errors. Random demand would scatter errors above and below the forecast instead of leaving 11 of 12 on one side. A qualitative method might be worth testing later, but the first step is to recognize the bias and look for its cause, such as optimistic sales input.

    Look for this next time: Forecast bias shows up as errors that fall on the same side of actual demand period after period, even when each error is small.

  2. Question 2 · Forecast and Manage Demand

    In a monthly sales and operations planning (S&OP) cycle, next quarter's demand plan is 20% above what the plants can produce with current capacity. Sales and operations each want their own plan approved. What should the S&OP process do?

    1. Approve the demand plan and let the plants find the extra capacity
    2. Approve the supply plan and have sales cut its forecast
    3. Hold both plans until the next cycle, when demand may settle
    4. Analyze the gap and agree on trade-offs that reconcile the plans
    Show answer and explanation for question 2

    Correct answer: D · Analyze the gap and agree on trade-offs that reconcile the plans

    The CSCP outline places sales and operations planning under aligning supply with demand, with three tasks: run the S&OP process, manage its inputs and outputs, and perform reconciliation and analysis. A 20% gap between demand and capacity is what reconciliation is for. The team weighs options such as overtime, outsourcing, building inventory ahead, or shaping demand, and agrees on one plan both functions can carry out. Approving the demand plan alone pushes an impossible load onto the plants. Approving the supply plan alone cuts sales without weighing the other options. Holding both plans leaves the gap unresolved while the quarter gets closer.

    Look for this next time: When the demand plan and the supply plan don't match, S&OP reconciles them through agreed trade-offs instead of approving one side.

  3. Question 3 · Manage the Global Supply Chain Network and Information

    A distributor finds the same supplier in its ERP system under three slightly different names, each with different payment terms. Some invoices are being paid on the wrong terms. Which action addresses the cause?

    1. Cleanse the supplier master data and merge the duplicate records
    2. Have accounts payable recheck the terms on every invoice by hand
    3. Add a fourth supplier record that holds the correct payment terms
    4. Retire all three records and drop this supplier
    Show answer and explanation for question 3

    Correct answer: A · Cleanse the supplier master data and merge the duplicate records

    The CSCP outline treats master data for customers, suppliers, products, engineering, and logistics as data to create, update, cleanse, and retire. Three versions of one supplier with conflicting terms is a data quality problem, so the fix is to cleanse the records: merge the duplicates into one record with the agreed terms and give someone ownership of future changes. Manual checks by accounts payable catch some errors but leave the bad data in place. A fourth record adds one more duplicate. Retiring the records and dropping the supplier treats a data problem as a supplier problem and could disrupt supply.

    Look for this next time: Duplicate or conflicting master data is fixed at the source by cleansing and merging records, not by workarounds downstream.

  4. Question 4 · Manage the Global Supply Chain Network and Information

    A supply chain director reports 97% on-time delivery every month, yet the CFO says the supply chain ties up too much cash. The executive team wants one view of performance that shows both concerns. What should the director build?

    1. A weekly report on on-time delivery by customer and by carrier
    2. A cost report listing freight and warehouse spending by region
    3. A balanced scorecard that pairs service and financial measures
    4. A dashboard tracking inventory dollars against budget only
    Show answer and explanation for question 4

    Correct answer: C · A balanced scorecard that pairs service and financial measures

    The CSCP outline separates financial from operational metrics and reports, and it names dashboards and balanced scorecards as tools for reporting them. The operational result here, on-time delivery, looks strong, while a financial concern, cash tied up in inventory, doesn't appear in the current report. A scorecard that pairs customer service with measures such as inventory investment or days of supply shows the trade-off in one place. A delivery-only report repeats the current blind spot. A freight and warehouse cost report misses the cash held in inventory. An inventory-only dashboard swings to the other extreme and hides service.

    Look for this next time: A balanced scorecard puts operational and financial measures side by side, so one strong number can't hide a weak one.

  5. Question 5 · Source Products and Services

    A manufacturer is deciding whether to keep molding a plastic housing in-house or buy it from an overseas supplier whose unit price is 18% lower. Which approach fits a make-or-buy analysis?

    1. Buy the part, since an 18% lower unit price settles the question
    2. Keep making it, since in-house production is always the safer choice
    3. Get one more round of quotes and pick whichever price is lower
    4. Compare total cost of ownership and whether molding is a core skill
    Show answer and explanation for question 5

    Correct answer: D · Compare total cost of ownership and whether molding is a core skill

    The CSCP outline lists three inputs to a make-or-buy analysis: manufacturing capabilities, core competencies, and total cost of ownership. Total cost of ownership adds the costs a unit price leaves out, such as freight, duties, the inventory held in a longer pipeline, and quality problems, so a lower price can still cost more overall. Whether molding is a competence the company wants to keep matters too. Treating the unit price as decisive ignores those costs. Keeping production in-house because it seems safer skips the analysis. Another round of quotes still compares price alone.

    Look for this next time: A make-or-buy decision weighs total cost of ownership and core competencies, not the unit price alone.

  6. Question 6 · Source Products and Services

    A hospital buys the same disposable gloves from one supplier every week, and staff write a new purchase order for each delivery. The paperwork delays shipments. Which ordering approach fits this repeat need best?

    1. A new request for quote to several suppliers before every order
    2. A blanket order with set terms and deliveries released against it
    3. One large standard order that covers the whole year's needs at once
    4. A spot purchase each week from whichever supplier has stock
    Show answer and explanation for question 6

    Correct answer: B · A blanket order with set terms and deliveries released against it

    The CSCP outline names three ways to place orders: standard, blanket, and e-procurement. A blanket order fixes the item, price, and terms for a period, and each delivery is released against it, which suits a repetitive need from one supplier and removes the weekly paperwork. The US Federal Acquisition Regulation describes blanket purchase agreements the same way, as a simplified method of filling anticipated repetitive needs. A new request for quote each week adds work and delay. One annual standard order would bring a year of gloves at once, with the storage space and cash that ties up. Weekly spot buying gives up agreed prices and terms.

    Look for this next time: Blanket orders suit repetitive purchases: terms are agreed once, and deliveries are released against the order as needed.

  7. Question 7 · Source Products and Services

    A consumer goods company buys office supplies from 40 vendors and a specialty resin from one qualified source. To save effort, it wants a single sourcing approach for every category. What would a segmented sourcing strategy do instead?

    1. Run the same competitive bid every quarter for both categories
    2. Sign long-term partnerships with all 40 office supply vendors
    3. Fit each category's approach to its spend and its supply risk
    4. Move the resin to the lowest bidder and trim the vendors later
    Show answer and explanation for question 7

    Correct answer: C · Fit each category's approach to its spend and its supply risk

    The CSCP outline asks candidates to create a segmented sourcing strategy, analyze the supply base, and rationalize or right-size it. Segmenting means each category gets an approach that fits how much is spent and how hard supply would be to replace. Office supplies are easy to source, so consolidating vendors and simplifying the buying fits them. A single-source specialty resin calls for a closer supplier relationship and a plan for supply risk. One quarterly bid for everything treats the resin like a commodity. Partnerships with 40 office vendors spend effort where little is at stake. Moving the resin to the lowest bidder ignores qualification and supply risk.

    Look for this next time: Segmented sourcing gives each category its own strategy, based on its spend and its supply risk.

  8. Question 8 · Manage Internal Operations and Inventory

    A bottling line has three steps in sequence: filling runs at 600 bottles an hour, capping at 450, and labeling at 550. Management wants more output and proposes a faster filler. Which change would raise the line's output?

    1. Add capacity at capping, the step that limits the whole line
    2. Install the faster filler, since filling starts the whole line
    3. Speed up labeling so that finished bottles leave sooner
    4. Run the filler longer to build a bigger pile of filled bottles
    Show answer and explanation for question 8

    Correct answer: A · Add capacity at capping, the step that limits the whole line

    The CSCP outline lists the theory of constraints among the continuous improvement philosophies candidates apply. A line in sequence can produce no more than its slowest step, so capping at 450 bottles an hour sets the output. Adding capacity at capping raises output until labeling, at 550, becomes the next limit. A faster filler only adds filled, uncapped bottles waiting in front of capping. Speeding up labeling improves a step that already has spare capacity. A pile of filled bottles can protect capping from interruptions, but capping already receives more bottles than it can handle, so a bigger pile does not raise output.

    Look for this next time: Output is set by the constraint, so improvement effort goes to the slowest step first.

  9. Question 9 · Manage Internal Operations and Inventory

    A food manufacturer learns that one lot of an ingredient from a supplier may be contaminated. The company used that ingredient in many products over two weeks. Which capability lets it limit a recall to the affected products?

    1. A cycle count of the ingredient that is still in the warehouse
    2. A supplier scorecard that rates the supplier's quality each quarter
    3. A demand forecast for each finished product next month
    4. Lot traceability from ingredient lots to finished lots and shipments
    Show answer and explanation for question 9

    Correct answer: D · Lot traceability from ingredient lots to finished lots and shipments

    Managing product traceability and chain of custody is a task in the CSCP outline. Lot traceability records which ingredient lots went into which finished-goods lots and where each of those lots was shipped, so the company can find exactly what to pull back. The US Food and Drug Administration describes the purpose of its food traceability recordkeeping rule in similar terms: faster identification and rapid removal of potentially contaminated food. A cycle count shows what remains in stock, not where used material went. A supplier scorecard matters for the relationship afterward but traces nothing. A demand forecast looks forward and holds no record of past lots.

    Look for this next time: Lot traceability connects input lots to output lots and shipments, which lets a recall target only what is affected.

  10. Question 10 · Manage Internal Operations and Inventory

    A warehouse sets a counting tolerance of plus or minus 2% for a high-value part. The system record shows 480 units, and a cycle count finds 450. What should happen next?

    1. Accept the record, since a 30-unit gap is small for a busy part
    2. Widen the tolerance to 10% so that this count falls within it
    3. Correct the record and look for the cause of the 6.25% variance
    4. Leave the record as it is until the annual physical inventory
    Show answer and explanation for question 10

    Correct answer: C · Correct the record and look for the cause of the 6.25% variance

    Defining and executing cycle counting and evaluating inventory accuracy are both tasks in the CSCP outline. The count is 30 units below the record, a 6.25% variance (30 divided by 480) against a 2% tolerance, so the record is inaccurate. It should be corrected and the cause found, such as unrecorded issues, picking errors, or receiving mistakes, so the error doesn't return. Accepting the record because the gap looks small ignores the tolerance set for this part. Widening the tolerance to fit the result hides the problem. Waiting for the annual physical inventory leaves planners working from a wrong balance for months.

    Look for this next time: A count outside its tolerance means the record is wrong: correct it and remove the cause, not just the number.

  11. Question 11 · Manage Internal Operations and Inventory

    A plant's master schedule loads its assembly cell with 130 hours of work in week 5, and the cell has 100 hours of available capacity that week. What is the right planning response before the orders are released?

    1. Release the orders anyway and let the cell work off the backlog
    2. Resolve the overload by adjusting capacity or moving work first
    3. Cut every product in the master schedule by the same percentage
    4. Ignore the gap, since capacity plans are rough estimates
    Show answer and explanation for question 11

    Correct answer: B · Resolve the overload by adjusting capacity or moving work first

    The CSCP outline groups developing the master schedule, determining material requirements, and evaluating capacity requirements under planning operations. A load of 130 hours against 100 available hours means the plan for week 5 can't be carried out as written, so planners resolve the overload before release: add capacity through overtime, an extra shift, or outsourcing, or move work to other weeks according to customer priorities. Releasing the orders anyway turns the gap into late orders. A flat percentage cut across all products ignores which orders matter most. Dismissing capacity plans as rough estimates defeats the point of checking them.

    Look for this next time: Capacity is checked against the master schedule, and overloads are resolved before orders are released.

  12. Question 12 · Manage Supply Chain Logistics

    A US importer buys machine parts from a Spanish exporter under the Incoterms rule DAP, with the importer's warehouse in Chicago as the named place of destination. The goods are damaged during the ocean crossing. Under DAP, who bears that loss?

    1. The seller, because delivery happens at the named place in Chicago
    2. The buyer, from the moment the goods are loaded at the port in Spain
    3. The ocean carrier, which carries the transit risk under every rule
    4. Both parties equally, since the damage happened between them
    Show answer and explanation for question 12

    Correct answer: A · The seller, because delivery happens at the named place in Chicago

    Using Incoterms is part of evaluating trade considerations in the CSCP outline. The US International Trade Administration explains that each Incoterms rule sets when the risk of loss or damage passes from seller to buyer by reference to its delivery point. For DAP (Delivered at Place), that point is the named place of destination, and the International Chamber of Commerce notes that delivery under DAP happens before unloading there. Damage at sea, before Chicago, therefore falls on the seller. Risk passing at loading in Spain describes a rule that names a port of loading, such as FOB. Incoterms rules set out the tasks, costs, and risks of the buyer and the seller, not of the carrier. No rule splits a loss equally.

    Look for this next time: Under each Incoterms rule, risk passes at the delivery point; for DAP, that is the named place of destination, before unloading.

  13. Question 13 · Manage Supply Chain Logistics

    An electronics retailer receives thousands of returned headphones a month. Many work fine or need only new ear cushions. Which handling plan best follows the reduce, reuse, recycle, and recover waste hierarchy?

    1. Send every returned unit to a recycler, the simplest process to run
    2. Send every returned unit to an energy-recovery plant for power
    3. Discard units that can't be sold as new and recycle the others
    4. Test and refurbish units for resale, and recycle only the rest
    Show answer and explanation for question 13

    Correct answer: D · Test and refurbish units for resale, and recycle only the rest

    Designing and managing reverse flow in the CSCP outline includes working with the reduce, reuse, recycle, and recover waste hierarchy. The US Environmental Protection Agency's waste management hierarchy ranks source reduction and reuse first, then recycling and composting, then energy recovery, with treatment and disposal last. Testing and refurbishing working headphones keeps them in use, and recycling only what can't be repaired follows that order. Sending everything to a recycler skips reuse for products that still work. Energy recovery sits below recycling. Discarding units that can't be sold as new wastes working products and puts disposal ahead of reuse.

    Look for this next time: Reverse logistics follows the waste hierarchy: reuse and refurbish first, recycle next, and dispose of products last.

  14. Question 14 · Manage Customer and Supplier Relationships

    A key supplier's on-time delivery has fallen from 96% to 81% over two quarters, and the scorecard results have already been shared with it. The supplier would be hard to replace in the short term. What is the best next step?

    1. Agree on a remediation plan with root causes, actions, and dates
    2. Move all of the supplier's volume to a new source within the month
    3. Keep sharing the scorecard each month and wait for a recovery
    4. Apply a penalty and pause all contact until deliveries recover
    Show answer and explanation for question 14

    Correct answer: A · Agree on a remediation plan with root causes, actions, and dates

    Measuring supplier performance and providing feedback in the CSCP outline includes executing a supplier remediation plan and setting up supplier development and improvement programs. Two quarters of decline after feedback call for a joint plan that names the root causes, the corrective actions, who owns each one, and the dates by which delivery must recover, with progress tracked on the scorecard. Moving all the volume at once is risky when the supplier can't be replaced quickly. Sharing results again without a plan has already failed for two quarters. A penalty with no contact damages the relationship and fixes none of the causes.

    Look for this next time: When feedback alone doesn't fix supplier performance, a remediation plan with causes, actions, owners, and dates comes next.

  15. Question 15 · Manage Customer and Supplier Relationships

    A distributor's largest customer complains about service even though the distributor's fill rate is 99%. Interviews show the customer judges service by deliveries that arrive within a two-hour window at its docks. What should the distributor do?

    1. Show the customer its 99% fill rate to prove service is strong
    2. Agree on a delivery-window KPI with the customer and track it
    3. Raise inventory levels so that the fill rate climbs even higher
    4. Offer the customer a price discount to offset its complaints
    Show answer and explanation for question 15

    Correct answer: B · Agree on a delivery-window KPI with the customer and track it

    Cultivating customer relationships in the CSCP outline includes interpreting the voice of the customer and defining measurements and KPIs with the customer. The interviews show this customer judges service by deliveries inside its two-hour dock window, which a fill rate doesn't capture, so both sides should agree on that measure and track it. Defending the fill rate argues against the customer's own experience. More inventory raises a number the customer doesn't use and adds cost. A discount may quiet the complaint for a while but leaves the delivery problem in place.

    Look for this next time: Service KPIs are defined with the customer, based on what the customer values, not only on internal measures.

  16. Question 16 · Manage Customer and Supplier Relationships

    Incoming inspection rejects a shipment of fasteners because 6% are out of tolerance, against a 1% limit in the supplier's quality agreement. Production can wait a week for good parts. What should purchasing do?

    1. Use the fasteners anyway and let production sort out the bad ones
    2. Drop the supplier at once and start looking for a new source
    3. File a quality claim with evidence and request corrective action
    4. Return the lot quietly and buy replacements elsewhere
    Show answer and explanation for question 16

    Correct answer: C · File a quality claim with evidence and request corrective action

    Managing quality cases or claims is part of measuring supplier performance in the CSCP outline. A 6% defect rate against a 1% limit in the quality agreement is a documented nonconformance, so purchasing files a claim with the inspection evidence, agrees on what happens to the lot, such as return, replacement, or credit, and asks the supplier for corrective action so the problem doesn't repeat. Using the parts shifts the supplier's failure onto production. Dropping the supplier after one rejected lot skips the agreed process and may lose a sound source. A quiet return fixes this lot but gives the supplier no reason to change.

    Look for this next time: A nonconforming delivery is handled through a documented quality claim that ends in corrective action.

  17. Question 17 · Manage Supply Chain Risk

    A medical device maker buys a critical sensor from a single supplier whose only plant is in a region that floods most years. A flood there would stop the maker's production for months. Which risk response fits best?

    1. Accept the risk, since the supplier always recovered before
    2. Plan a contingency, such as qualifying a second source elsewhere
    3. Wait for the next flood to learn how long the supplier needs
    4. Switch to a cheaper sensor supplier without checking its location
    Show answer and explanation for question 17

    Correct answer: B · Plan a contingency, such as qualifying a second source elsewhere

    The CSCP outline's responses to supply chain risk include contingency planning to minimize impact, eliminating avoidable risks, and accepting unavoidable ones. A flood that is likely most years and would halt production for months is both probable and severe, so a contingency such as qualifying a second source in another region, or holding extra stock of the sensor, reduces the impact. Acceptance suits small or unavoidable risks, not a severe one that can be reduced. Waiting for the next flood turns a known risk into a crisis. Switching suppliers on price without checking location could move the risk instead of reducing it.

    Look for this next time: Likely, high-impact supply risks call for contingency plans such as a second source, not acceptance.

  18. Question 18 · Manage Supply Chain Risk

    A supply chain team has 30 risks in its risk register and budget to act on only five this year. How should it choose which risks to address first?

    1. Pick the five risks that were added to the risk register most recently
    2. Pick the five risks that worry the largest supplier the most
    3. Spread the budget evenly so that all 30 risks get some action
    4. Rank the risks by impact and probability, then act on the top five
    Show answer and explanation for question 18

    Correct answer: D · Rank the risks by impact and probability, then act on the top five

    After identifying risks, the CSCP outline calls for assessing their impact, timing, or probability before choosing responses. Ranking the 30 risks by how likely they are and how much harm they would do shows where five responses reduce the most risk, and timing can break ties, since a risk that may hit next quarter needs attention before one that is years away. How recently a risk was added says nothing about its size. One supplier's concerns are an input, not the company's priorities. Spreading the budget across all 30 leaves each response too thin to change much.

    Look for this next time: Assessing impact, probability, and timing turns a long risk register into a short list of priorities.

  19. Question 19 · Evaluate and Optimize the Supply Chain

    A company is considering a supplier switch that would cut costs 8%, but the new supplier's factories have unsafe working conditions and heavy water pollution. Leadership asks how a triple bottom line view would judge the switch. What is the answer?

    1. Approve it, since an 8% saving improves profit
    2. Approve it if the supplier offers an even lower price next year
    3. Weigh the social and environmental harm along with the saving
    4. Leave the judgment to the supplier, which runs its own plants
    Show answer and explanation for question 19

    Correct answer: C · Weigh the social and environmental harm along with the saving

    In the CSCP outline, embedding sustainability in the supply chain starts with incorporating the triple bottom line. Harvard Business School Online describes it as measuring social and environmental impact in addition to financial performance, often summarized as people, planet, and profit. The 8% saving counts on the profit side, but unsafe working conditions and water pollution are social and environmental costs the company takes on through its supply chain, and they weigh against the switch. Approving on savings alone uses one of the three measures. A lower price next year changes only the financial side. Leaving the judgment to the supplier ignores the company's responsibility for its own sourcing decisions.

    Look for this next time: A triple bottom line view judges supply chain decisions on people and planet as well as profit.

  20. Question 20 · Evaluate and Optimize the Supply Chain

    A vendor offers a blockchain platform to track shipments across a company's suppliers and carriers, and a board member wants it adopted this quarter. Few of the company's partners share electronic data today. What should the supply chain team do first?

    1. Assess how the platform would affect current processes and partners
    2. Adopt it this quarter, since new technology gives an early edge
    3. Reject it, since emerging technologies carry too much risk
    4. Ask the vendor for a discount and sign before its prices rise
    Show answer and explanation for question 20

    Correct answer: A · Assess how the platform would affect current processes and partners

    The CSCP outline treats emerging trends such as blockchain, the Internet of Things, and control towers in three steps: understand the trend, assess its impact on current practices, and incorporate changes as needed. This platform depends on partners sharing data, and few do today, so the team should first assess what it would change and what partners would need, perhaps through a small pilot, before deciding. Adopting it this quarter skips the assessment. Rejecting emerging technology outright ignores the outline's call to consider these trends. A discount deadline is a sales tactic and gives no reason to adopt.

    Look for this next time: Emerging technologies are assessed against current processes and partners before they are adopted.

Use the sample well

The rationale matters more than the score.

A short set can show you what deserves another look. A strong run shows you can read a supply chain scenario, use the numbers it gives, and pick the response the CSCP body of knowledge supports. Twenty questions are a small sample, so the result does not predict a 300 on ASCM's 200–350 scale.

01

Answer before reviewing

Choose the one best answer for the scenario as written. Then read why each other option falls short.

02

Read every rationale

Confirm why the best option fits, even when you were right.

03

Follow the pattern

Use recurring misses—not one score—to choose your next focus.