ARRT Radiography Exam guideStudy & preparation
ARRT Radiography Practice Questions: Eight Original Examples
Short answer
Try eight original questions across Patient Care, Safety, Image Production, and Procedures, the four domains in ARRT's Radiography specification effective March 1, 2027. Each has one correct answer and explanations for all four options. These independent foundational examples are not official ARRT items, a complete mock exam, or a prediction of your exam result.
What do these original questions cover?
These eight original ARRT Radiography practice questions cover Patient Care, Safety, Image Production, and Procedures, the four domains in ARRT's specification effective March 1, 2027. They are independent educational examples with explained answers, not official or recalled examination questions.
Two questions per domain is our editorial organization, not the exam's distribution. The set does not reproduce exam difficulty, cover every topic or question format, or establish readiness.
The specification and ARRT's version index were checked November 5, 2026. For an appointment through February 28, 2027, use the earlier applicable outline; see the 2027 Radiography changes guide. Confirm the version before building your study checklist.
Choose one answer per question before reading its explanation. Write down the decisive clue and mark any answer you guessed, even if it turns out to be correct.
Which Patient Care answers follow the stated conditions?
1. What changes when hands are visibly soiled?
After patient care, a technologist removes gloves and sees visible soil on their hands. Which action addresses the stated hand-hygiene condition?
- A. Put on clean gloves without cleaning the hands.
- B. Use alcohol-based hand rub alone.
- C. Wash with soap and water.
- D. Omit hand hygiene because gloves were worn.
Answer: C. The decisive clue is visible soil: CDC calls for soap and water in that circumstance. A replaces the gloves but omits hand hygiene. B overlooks the condition that selects soap and water here. D incorrectly treats prior glove use as a substitute for cleaning the hands after removal.
2. When should shared equipment be reprocessed?
Reusable patient-care equipment has just been used and will be used for another patient. Which preparation follows the between-patient requirement?
- A. Reprocess it according to the manufacturer's instructions before the next patient.
- B. Change gloves and use the equipment without reprocessing it.
- C. Reprocess it only if visible dirt appears.
- D. Save reprocessing for the end of the shift.
Answer: A. The clue is moving between patients. B changes what is on the worker's hands, not the equipment's condition. C adds a visible-dirt restriction to a between-patient requirement. D delays the necessary action beyond the next use. The question does not prescribe one chemical or require sterilization of every device.
Both answers follow CDC's core infection-control practices, sections 5–7, checked November 3, 2026. For your next study task, explain why hand hygiene and equipment reprocessing are separate responsibilities.
If you want more practice than this short set offers, 550 questions are planned for full ARRT (R) prep at launch; check availability before including it in your study schedule.
How do Safety questions distinguish optimization and dose review?
3. What is the goal of exposure optimization?
An examination is already justified. The imaging team is selecting technique for the clinical task and patient. Which goal best describes optimization?
- A. Maximize exposure to prioritize image appearance.
- B. Minimize exposure even if diagnostic information becomes inadequate.
- C. Use identical settings for every patient size and examination.
- D. Use the lowest reasonably necessary exposure that supplies adequate diagnostic information.
Answer: D. The answer must preserve both exposure restraint and diagnostic adequacy. A omits exposure restraint. B sacrifices the information needed from the examination. C ignores the patient and clinical task. This question asks for a governing principle, not a numerical technique setting.
4. What does a recurring DRL exceedance mean?
A facility finds a recurring dose index above an applicable diagnostic reference level (DRL) for comparable examinations and patient groups. What should the quality-assurance process do next?
- A. Conclude that every affected patient exceeded an individual dose limit.
- B. Investigate technique, circumstances, and diagnostic image quality.
- C. Declare the machine defective based on that finding alone.
- D. Ignore the pattern because the images remain usable.
Answer: B. A recurring comparison warrants investigation, not a conclusion about its cause. A treats a DRL as an individual dose limit. C declares an equipment failure without establishing it. D dismisses an opportunity to review optimization. Exceeding a DRL is not, by itself, proof of patient harm.
The FDA's medical x-ray guidance, checked November 11, 2026, supports both distinctions under optimization and information for the imaging team. If either was unclear, use the Radiography Safety study checklist to separate dose concepts from protection tasks.
What should you check in Image Production scenarios?
5. How should anatomical side be identified at acquisition?
Before a planned exposure, a technologist checks how the image will identify anatomical side. Which action performs the acquisition-time marker task?
- A. Use the appropriate radiopaque anatomical side marker during acquisition.
- B. Rely solely on the patient-name label.
- C. Leave all side identification until an arbitrary later time.
- D. Assume the anatomy's displayed position proves which side was examined.
Answer: A. The clue is at acquisition. B identifies the patient, not anatomical side. C postpones the specified task. D substitutes an assumption for the marker. This answer does not decide whether an already acquired image needs repeating or whether a later annotation has a separate purpose.
ARRT's 2027 Radiography Task Inventory, page 5, task 61, explicitly describes radiopaque side markers at acquisition; checked November 11, 2026.
6. Which instruction addresses voluntary motion?
A cooperative patient can follow instructions for a chest exposure. Which pre-exposure instruction directly addresses voluntary motion blur?
- A. Explain the appointment-booking process.
- B. Describe the patient-name label.
- C. Explain keeping still and the appropriate brief breath hold.
- D. Describe the laterality label.
Answer: C. Stillness and breathing instructions address movement. A concerns scheduling; B and D concern identification. None of those three substitutes for motion instructions. ACR/RSNA's chest x-ray guidance, checked November 11, 2026, supports this answer.
Record whether your difficulty was identification or movement, then select a matching review activity. When planning additional preparation, review the availability of full ARRT (R) prep, planned for launch before relying on its availability.
How do you reason through basic chest Procedures?
7. Which arrangement matches a typical standing two-view chest examination?
For the typical standing examination described by ACR/RSNA, which pair matches the first and second views?
- A. Back against the plate first; side against it second.
- B. Chest against the plate first; side against it with arms elevated second.
- C. Chest against the plate for both views, repeating the first arrangement.
- D. Side against the plate for both views, omitting the frontal arrangement.
Answer: B. The source describes back-to-front and side views. A reverses the first orientation. C repeats the first arrangement. D omits it. This identifies the stated geometry, not a universal protocol for every patient.
8. What if the patient cannot stand?
A requested chest examination involves a patient who cannot safely stand. Which response recognizes an appropriate planning option?
- A. Require standing regardless of the patient's limitation.
- B. Assume chest imaging is impossible without standing.
- C. Substitute another patient's chest image.
- D. Consider an approved adapted examination, including lying-down imaging, with the clinical team and facility protocol.
Answer: D. Inability to stand permits consideration of adaptation. A disregards the limitation; B incorrectly excludes lying-down imaging; C does not examine this patient. The scenario does not specify a projection or transfer method.
Both answers use ACR/RSNA's chest x-ray explanation, checked November 11, 2026. Add these examples to the adaptation and positioning columns in the Procedures study matrix.
How should you review your answers and choose the next study task?
Use this editorial worksheet for wrong answers and correct guesses. Fill one row per unresolved concept; a total correct count alone does not explain what to study.
| Item and domain | Decisive clue missed | Exact topic or reference | Next study activity | Later unfamiliar check |
|---|---|---|---|---|
| Example: 4, Safety | Recurring comparison with a DRL | FDA: information for the imaging team | Explain why investigation differs from a dose-limit conclusion | Solve a different DRL scenario and justify each rejected option |
| Your item/domain | State the condition you overlooked | Record the source section and outline topic | Choose one specific review task | Find a new question testing that distinction |
Do not convert this eight-item result into an ARRT score, a pass probability, or a readiness threshold. Return to unfamiliar questions after reviewing the underlying concept; recognizing an answer you have just read is a different task.
For more practice, the practice-test selection guide explains how to examine coverage and rationales. ARRT's Primary Eligibility Pathway Handbook, page 38, says it does not endorse review products; checked November 5, 2026.
Put the next activity into your 2027 Radiography study schedule. If you are budgeting for another resource, check full ARRT (R) prep, planned for launch, as a future option and base today's plan on materials you can access now.
Trust the source
Official sources
Exam policies can change. Use these primary sources for the most current details.
- Radiography Content Specifications, effective March 1, 2027ARRT↗
- Examination Content SpecificationsARRT↗
- Radiography Task Inventory, effective March 1, 2027ARRT↗
- 2026 Primary Eligibility Pathway HandbookARRT↗
- Core Infection Prevention and Control Practices for Safe Healthcare Delivery in All SettingsCDC↗
- Medical X-ray ImagingFDA↗
- Chest X-rayAmerican College of Radiology and Radiological Society of North America↗