Journeyman Plumber Exam guideLicensing, registration & costs

How to Become a Journeyman Plumber in 2027: Hours, License Steps and the Exam

Updated 7 min read17 official sources

Short answer

To become a journeyman plumber in 2027, you work under licensed plumbers for the hours your state requires, get your licensing agency's approval to test, pass its journeyman exam and receive the license or certificate. The hours differ by state: Washington asks for at least 8,000 hours as a plumber trainee, 4,000 of them in commercial or industrial work; Minnesota four years of recorded experience, counted at no more than 1,750 hours a year, or a registered apprenticeship; and Colorado up to four years (6,800 hours). These rules were current on November 11, 2026, and none of these states had announced a change for 2027.

How do you become a journeyman plumber in 2027?

You become a journeyman plumber by working under licensed plumbers for the hours your state requires, passing its journeyman exam and receiving the license or certificate. The path looks similar everywhere: supervised work, documented hours, approval to test, the exam, then the credential. The hours, paperwork, supervision rules and exam change from state to state, so this guide uses examples from official state and testing-program pages we read on November 11, 2026. Those are the rules published for 2027 test dates, and none of the pages announced a change, but an agency can still revise them, so confirm yours with your state's licensing agency.

What are the steps to a journeyman plumber license?

  1. Start working legally under supervision. In Washington you typically begin as a plumber trainee, because L&I requires certification to work in the plumbing trade. In Minnesota you register with the Department of Labor and Industry (DLI) as a registered unlicensed plumber, work as a W-2 employee of a licensed plumbing contractor or registered employer, and stay directly supervised at all times by a licensed journeyworker or master plumber. Colorado requires an apprentice to stay registered until they hold a Colorado license.
  2. Earn and document your hours. Washington wants affidavits of experience. Colorado wants an Affidavit of Experience from current and former employers, and applicants may not verify their own experience. In Minnesota, the licensed master plumber responsible for the work certifies it.
  3. Get approval to test. Washington approves your affidavits and continuing education before you apply, and an approved application is good for one year. Minnesota takes the application online with a $50 fee. Colorado's division sends a letter of acceptance with instructions for reaching PSI, and Oregon mails a Letter of Authorization, after which you have 60 days to take the exam.
  4. Pass the exam. Its format, code and book rules depend on your state, as the guide to journeyman plumber exam formats shows.
  5. Receive the license or certificate. Minnesota requires you to pass the written exam before you apply for the journeyworker license and sends payment instructions once you pass.

For Washington’s documentation step, use the plumber affidavit checklist to organize employers, reporting periods, work categories and signatures before submission.

How many hours do you need to become a journeyman plumber?

JurisdictionExperienceOther conditions
Washington (journey level plumber, PL01)Four years or more, at least 8,000 hours, as a plumber trainee under a certified journey level plumberAt least 4,000 of the hours in commercial or industrial installations; hours from out-of-state employers or programs don't count
Minnesota (journeyworker plumber)Four years of recorded experience as a registered unlicensed plumber, counted at no more than 1,750 hours a yearMust include 2,000 hours of water distribution, 2,000 hours of drain, waste and vent and 1,000 hours of fixture installation; a DLI-registered apprenticeship also qualifies
Colorado (journeyworker plumber)Up to four years (6,800 hours) of practical experienceOne month of full-time work counts as 163 hours
Nevada NBOPE (Clark County and Reno)Four years in a state-registered apprenticeship, or 8,000 hours of documented experienceApplications go through NITC

Minnesota caps out-of-state experience at two years unless you first earn a plumber's license in that state. Colorado's page describes 6,800 hours as the most experience its board requires for a journeyworker license, so ask the division how your own hours will count.

Some plumbers also hold NITC's national Journey Level Plumber certification. It asks for at least four years of experience installing plumbing systems, after a United Association training program or the equivalent, and it stays valid for five years. It is a personnel certification, so check whether your jurisdiction accepts it before you count on it.

While you build hours, you can practice plumbing code questions by content area with full journeyman plumber prep planned for launch, weighted by ICC's national outline.

What changes for journeyman plumber candidates in 2027?

The hour and approval rules above are the ones published for 2027 test dates, and none of the agencies we checked had announced a change. The dated changes sit on the exam side:

  • Two passing scores at ICC. Starting December 1, 2026, ICC offers its national exams in a 70% version and a 75% version, and your jurisdiction tells you which one you need. ICC's Kansas bulletin requires 75% for Kansas candidates.
  • Older Kansas exams close. Kansas's ICC exams based on the 2015 codes close to new registrations on December 1, 2026.
  • New code editions. IAPMO published the 2027 Uniform Plumbing Code on June 11, 2026, and Oregon's plumbing code moved to the 2024 UPC on October 1, 2026. No exam we checked has announced a move to a 2027 code.

The guide to the 2027 plumbing codes and journeyman exams lists which edition each exam uses.

How much does the journeyman plumber exam cost?

ExamFee as checked on November 11, 2026If you fail
Washington (L&I and PSI)$202.10 nonrefundable application and exam fee, plus a PSI scheduling feeSubmit a new application and $202.10
Minnesota (DLI)$50 exam feeWait 30 days before reapplying
ICC National Journeyman Plumber (T25-N)$120Wait 10 days before retaking
ICC jurisdiction exams, such as Philadelphia, Kansas City and Kansas$115Wait 10 days before retaking
NITC Journey Level Plumber$140Retest at the next scheduled exam
Nevada NBOPE$250 test fee, plus $90 at a Prometric centerSee NITC's instructions
Colorado (PSI)Listed in PSI's candidate handbookAsk the division or PSI

Agencies add their own fees. Minnesota charges $14 to register as an unlicensed plumber and $19 to renew each year, and a journeyworker license renews for $53 every two years, with 16 hours of continuing education. In Washington, a plumber with a current out-of-state license can get a one-time 120-day temporary permit for $100.30 while waiting to test.

Prep is the last cost to plan for, and you can pick a 30-, 90- or 180-day access period planned for journeyman plumber prep to match your exam date.

What happens if you fail the journeyman plumber exam?

You can try again, but each exam sets its own wait and paperwork:

  • ICC: wait 10 days before retaking a failed national exam. ICC's Minneapolis bulletin sets 60 days.
  • Minnesota: wait at least 30 days. Results come by mail within two weeks.
  • Oregon: wait 30 days after each failure. Your results come with a strength and weakness report and a reapplication form.
  • Washington: submit a new application and the $202.10 fee.
  • NITC: retest at the next scheduled exam, at NITC's offices or a Prometric center.

Oregon is the only exam in this list whose page mentions a strength and weakness report. Whatever your exam reports, the free journeyman plumber retake plan turns the areas you name into a study schedule.

Before you rebook, rehearse a full sitting with the timed mock exam planned for journeyman plumber prep at launch.

Can a plumbing license count in another state?

Sometimes, on each state's terms:

  • Washington has reciprocal journey level certification with Idaho. Other out-of-state plumbers must pass Washington's exam, and L&I reviews their license first.
  • Colorado may license you by endorsement if your state-issued license, held for at least six months, came from a comparable exam based on the code Colorado currently uses, and you completed an approved apprenticeship or the required experience.
  • Minnesota lets you sit for its journeyworker exam with a current license from a state that requires at least four years of experience and an exam to qualify.

Where should a future journeyman plumber start?

Find your state's licensing page and exam bulletin first, because they set the hours, the vendor, the code edition and the book rules. Then test what you already know with the 20 free practice questions for the journeyman plumber exam, and build the weeks before your exam date with the free study plan for the journeyman plumber exam.

Trust the source

Official sources

Exam policies can change. Use these primary sources for the most current details.