LEED Green Associate guideRegistration & costs

LEED® Green Associate™ Exam Day: ID and Check-In Checklist

Published 6 min read4 official sources

Short answer

For LEED® Green Associate™ exam day, GBCI requires original, unexpired government-issued identification with a Roman-character name matching your registration, a recognizable photo, a signature, and issue and expiration dates. Secondary identification can supply missing elements, but digital IDs and copies are not accepted. Contact GBCI at least 10 business days before testing if your registration name differs from your ID, and check the instructions in your appointment confirmation.

Does your ID meet every required element?

GBCI's LEED® Green Associate™ Candidate Handbook requires original, unexpired government-issued identification with a name in Roman characters that matches your registration. Your identification must also provide a recognizable photo, signature, and issue and expiration dates; the handbook permits secondary identification to supply missing elements.

Use the physical documents you intend to present when you work through this checklist. These requirements were checked November 5, 2026, against the September 2026 handbook; recheck the current instructions before your appointment.

CheckWhat to verify before exam day
Original documentYou have the original ID. A digital ID, photograph, or copy is not accepted.
Government issuanceYour primary identification is government-issued.
NameThe Roman-character name matches the name on your exam registration.
PhotographThe photograph is recognizable as you.
SignatureThe required signature is present, or you have resolved the missing element under the secondary-ID policy.
DatesIssue and expiration dates are present, and the ID will be unexpired when you test.

Do not stop at “I have an ID.” Examine every element. If one is missing, read the handbook's identification section and ask GBCI about your intended combination of documents before relying on it. Secondary ID is a way to address missing elements under the policy, not permission to substitute any convenient document.

What if your registration name differs?

The handbook says to contact GBCI at least 10 business days before testing for a name discrepancy, as checked November 5, 2026. Compare your registration with your ID early enough to use that process. Do not leave the comparison until the evening before the exam.

A practical check is to place the registration record and original ID side by side and read the name character by character. A familiar nickname in your account or a previous surname is a reason to resolve the record, not to assume the check-in staff will accept your explanation. Ask GBCI what correction or documentation your situation requires.

If fewer than 10 business days remain, contact GBCI immediately and describe the mismatch. The published lead time does not establish that a last-minute correction will be completed. Keep the response and verify the corrected registration before treating the issue as resolved.

If the issue changes your preparation calendar, establish a workable appointment first. When comparing future preparation options, you can check availability of full LEED Green Associate prep, which is planned for launch before deciding what to include in your revised plan.

What should you verify in the appointment confirmation?

Registration and an appointment are separate steps. GBCI provides an exam eligibility ID, or EID, for scheduling; Prometric provides a separate 16-digit appointment confirmation number. Keep both, and use the appointment confirmation to check the test you have actually booked.

Read these details together:

  1. Date and time: enter the confirmed appointment in your calendar.
  2. Time zone: verify the zone shown rather than assuming the displayed time is your local time.
  3. Delivery method: confirm whether you booked a test center or a remote appointment.
  4. Location or connection instructions: review the address for a center or the remote check-in directions.
  5. Check-in instructions: follow the arrival or login requirements supplied for your appointment.

For a test center, plan the journey and a practical travel buffer. For remote delivery, set aside time to prepare the space and equipment. Those are planning choices; they do not replace Prometric's check-in instructions or establish a universal arrival deadline.

If you discover the wrong delivery method or need a different date, use the LEED Green Associate registration and appointment timeline to review the scheduling process before making changes. Verify the resulting confirmation afterward.

What happens at test-center check-in?

The official appointment guidance describes an ID check and security screening before testing. Personal belongings are stored at the center. Bring the identification you checked in advance, and follow staff instructions about belongings and entry to the testing area.

You do not need to supply your own scratch paper. GBCI's Exam Preparation guidance says test centers provide scratch material: a dry-erase board or two sheets of paper with a writing instrument. Do not bring your own scratch materials as a substitute.

The handbook permits test-center breaks, but the exam clock continues running. A break therefore uses part of the time available to answer questions. Ask the staff how to follow the center's break procedure before you need it; do not assume that stepping away pauses the exam.

Once the check-in plan is settled, keep any remaining content review separate from the documents you will bring. For preparation beyond these free guides, full LEED Green Associate prep is planned for launch; check its availability when comparing options.

What changes for remote check-in?

Remote delivery still requires preparation for identification and security checks, plus a suitable testing environment. The official online-exam guidance calls for a quiet, enclosed, well-lit private space. Clear your desk and surrounding aids, and arrange for other people to stay out: third-party entry can terminate the test.

Complete the current Prometric readiness check and install ProProctor software beforehand. GBCI recommends checking readiness before booking and again about one week before testing. A successful system check does not establish that you have the permissions needed to install or run the software; if you use employer-controlled equipment, resolve that with your IT team ahead of time.

Follow the current vendor requirements linked from your appointment instructions for your particular computer. If a requirement or setup remains unclear, ask Prometric before exam day rather than assuming that general compatibility advice settles it.

The handbook prohibits breaks during a remote exam. If break needs or room privacy affect your choice, review remote versus test-center delivery for LEED Green Associate while there is still time to resolve the booking.

What should you do if a problem arises?

Match the problem to the next action:

ProblemNext action
ID is missing an element or the name differsContact GBCI with the exact issue and check the handbook's ID requirements.
Confirmation shows the wrong appointment detailsReview the scheduling instructions and contact Prometric for appointment assistance.
Remote software or equipment is not readyUse Prometric's current support instructions; resolve employer permissions with IT where needed.
Something goes wrong during check-in or testingTell the test-center staff or remote proctor immediately and follow the support instructions provided.

Keep your confirmation, EID, and any relevant support correspondence accessible before testing. If you later need to describe an incident, record the time and what happened without reproducing exam questions. Do not assume that reporting a problem guarantees admission, a refund, or a replacement attempt.

Your final check should be concrete: the correct original ID is ready, the name matches, the appointment details are verified, and the center journey or remote setup is prepared. If further study is still part of your plan, check availability before relying on full LEED Green Associate prep, which is planned for launch. Finish the administrative checks first so your remaining preparation can focus on the exam itself.

Trust the source

Official sources

Exam policies can change. Use these primary sources for the most current details.