NHA Certified EKG Technician (CET) guideStudy & preparation

NHA CET EKG Acquisition Review: Setup, Leads and Clean Tracings

Published 6 min read3 official sources

Short answer

EKG Acquisition accounts for 44 of the 100 scored items in NHA's currently linked CET test plan, checked November 5, 2026. Review equipment and settings, patient preparation, electrode configurations, complete recordings, artifacts, and stress or ambulatory tasks as one acquisition workflow. Confirm the applicable test plan for your appointment before choosing materials.

Why is acquisition the largest current CET domain?

EKG Acquisition accounts for 44 of the 100 scored items in NHA's currently linked CET test plan, checked November 5, 2026. It is the largest scored domain and covers the workflow from preparing equipment and the patient to obtaining, checking and handling a complete recording.

The 44% share comes from the 100 scored items. It does not describe the distribution of all presented questions, which also include unscored pretest items. The guide to what is on the NHA CET exam explains that distinction and how to confirm the plan for your appointment.

Use this domain as a sequence of tasks, rather than a list of electrode locations to memorize:

Part of acquisitionWhat the current test plan includes
Get readyEquipment maintenance, cleaning, supplies, speed and gain
Prepare and connectSkin preparation, patient positioning and electrode configurations
Obtain and checkComplete lead recordings and artifact review
Finish the taskMounting or filing tracings
Apply the appropriate setupStandard 12-lead, stress, ambulatory and telemetry work, including special populations

This sequence is a study organizer. Actual patient procedures follow your supervised training, equipment instructions and local protocols. Start by marking which task you can explain clearly and which still requires demonstration or review.

What should I check before attaching electrodes?

NHA's acquisition domain includes equipment readiness, settings, skin preparation and patient positioning. A useful practice routine is to explain each decision before moving to electrode placement.

  1. Identify the recording task. Name the procedure and the configuration your training specifies for it.
  2. Review equipment readiness. Check the maintenance, cleaning and supply requirements in the equipment instructions and your facility's procedure.
  3. Identify the settings. Locate speed and gain and explain how you would verify that each is appropriate for the recording.
  4. Review positioning and skin preparation. Use the procedure taught for the patient and recording type.
  5. Identify any adaptation you need to confirm. The test plan includes special populations; one memorized standard setup does not resolve every situation.

For skin preparation, GE HealthCare's placement guidance describes cleaning and completely drying the skin before placement. NHA's study-guide corrections specify that clipping is preferred if hair removal is needed, to reduce irritation. Do not turn that conditional instruction into a rule to remove hair from every patient.

These details belong alongside safety and communication, which have their own scored domain. Use the NHA CET safety and patient-care review to connect preparation with the rest of the encounter.

When choosing resources for gaps in this workflow, check whether full NHA CET prep, planned for launch, is available for acquisition practice, before adding it to your preparation schedule.

How do ten electrodes relate to a standard 12-lead recording?

A standard 12-lead EKG uses ten electrodes, according to GE HealthCare's placement guidance. The number of physical electrodes and the number of leads in the recording describe different things; they are not interchangeable counts.

For exam review, separate two checks: whether you can identify the physical placement and whether you can verify the required recording is complete. NHA lists complete lead recording as an acquisition task, so recognizing electrode names alone does not cover the whole objective.

A useful learning exercise is to work through a standard setup with your instructor, then identify its recorded leads on the resulting tracing. Explain what you checked at each stage. If you can name the electrodes but cannot assess completeness using your training checklist, record that as a separate study gap.

Keep this standard configuration separate from ambulatory, stress and telemetry configurations. The current blueprint includes all of them, but it does not establish a single placement scheme for every device or patient.

Which placement landmarks and settings deserve review?

The following standard chest landmarks come from GE HealthCare's manufacturer guidance, checked November 5, 2026. Review them with an appropriate training aid and supervised practice.

Chest electrodeStandard landmark
V1Fourth intercostal space at the right sternal border
V2Fourth intercostal space at the left sternal border
V3Between V2 and V4
V4Fifth intercostal space at the midclavicular line
V5Anterior axillary line, horizontally level with V4
V6Midaxillary line, horizontally level with V4 and V5

Notice that V3 depends on V2 and V4. V5 and V6 use the horizontal level established by V4; do not replace those landmarks with a rule to follow one intercostal space around the chest. Practice stating the location in words and then locating it, instead of relying only on a familiar diagram.

For settings, distinguish gain from paper speed. NHA's correction for its study-guide gain example states that a setting of 20 mm/mV doubles tracing height. That is a change in vertical display, not a change in paper speed. It is an example to understand, not an instruction to use 20 mm/mV for every recording.

A short review prompt is: “Which setting is being changed, and what aspect of the tracing does that affect?” Check your answer against your course and equipment materials before doing measurement exercises. Do not learn a numerical method without also checking the recording conditions it assumes.

If you are comparing additional resources for these topics, review the availability of full NHA CET prep, planned for launch, and assess any option against your applicable test plan.

How do I check completeness and investigate artifacts?

The current NHA plan specifically names wandering-baseline, somatic and electrical artifacts. It also includes complete recordings and mounting or filing tracings. Build your review around those separate tasks rather than treating every unfamiliar tracing as the same problem.

For a practice recording, use this editorial checklist:

  • Can I verify that the required leads were recorded, using my training procedure?
  • Can I identify the recording settings before interpreting measurements?
  • Can I distinguish the artifact categories named in the blueprint in the examples supplied by my course?
  • Can I explain the checks my training requires before choosing a corrective action?
  • Can I complete the required handling or filing steps after acquisition?

An artifact label alone is not enough to justify one universal correction. Use the actual setup, equipment instructions and supervised training to investigate the recording. Do not assume that a single adjustment resolves every tracing assigned to one category.

Make your error log specific. “Artifacts need work” is difficult to act on; “I recognized the category but could not explain the next equipment check” identifies a task to revisit. Record the task, what you missed, the source or demonstration used to correct it, and what you will try again. This is a study method, not an NHA scoring rule.

Which stress and ambulatory tasks need separate practice?

The acquisition domain extends beyond the standard resting 12-lead setup. NHA includes ambulatory, stress and telemetry configurations, special populations, and monitoring and supporting the response to stress-test complications.

Give each configuration its own review entry. For each one, identify the equipment instructions, preparation steps and recording checks taught in your program. For stress testing, also identify the monitoring and response responsibilities within your role. Use supervised instruction and local protocols for those responsibilities; a blueprint topic is not a complete emergency procedure.

End your next study session with three concrete tasks: explain one setup from beginning to end, verify the standard chest landmarks, and revisit one unresolved recording-quality error. Add any nonstandard configuration you cannot explain to your next supervised practice session.

Once you know which tasks need more work, check full NHA CET prep, planned for launch, when planning your next preparation step. Confirm availability and relevant coverage before relying on any future resource.

Trust the source

Official sources

Exam policies can change. Use these primary sources for the most current details.